Vire 7 - Starter-Generator Circuit Diagrams

Two apologies from the Webmaster: Back in April 2002, a contact in Finland provided me with circuit diagrams for both a Bosch and a Delco-Remy Starter-Generator (yes, the circuits are different). Unfortunately, due to a computer crash, I lost both the diagrams and his E-mail address. However, I was able to recover the E-mail and the diagram in May 2004, so here they are, at the bottom of the page. A big "Thank you" to Sampo, two years behind schedule!

A month after recovering the scanned images, I also recovered a diagram sent to me by Vis, the Webmaster at www.parkerdawson.com. It's a schematic of a circuit with separate starter relays and voltage regulators. Thanks Vis.

Simple Circuit - Combined Starting-Charging Relay (Original Vire installation)

Starter Generator Circuit Diagram

The cross section of the cables indicated by the thinner lines in the diagram is 2.5 sq.mm (0.0039 sq.in). The cross section of the cables indicated by the thicker lines is 16 sq.mm (0.025 sq.in).

Alternative Circuit - Separate Starting Relay and Voltage Regulator

Starter 
  Generator Circuit Diagram.  Click on the image for a larger, high-resolution 
  image

Bosch Starter-Generator with Starting Relay

Click on the image for a larger, high-resolution image

If you want a larger, high-resolution image (400 KB) of the Bosch wiring diagram, then click here.

Delco-Remy Starter-Generator with Starting Relay

Click on the image for a larger, high-resolution image

If you want a larger, high-resolution image (400 KB) of the Delco-Remy wiring diagram, then click here.

Close this window to return to the previous page